MENUCall: 716-304-8590
Marine Smart Energy logo

PK-M4.14 Vetus M4.14 Marine Serpentine Pulley Kit

$479.00 $407.00

  • Now you are able to run a high output marine alternator
  • eliminate belt dust
  • Save fuel
  • Reduce engine noise
  • Increase the life of your engine
  • Add a second crank pulley and run other devices
  • Greatly extend your cruising time and distance
SKU: PK-VE-M4.14 Category:


This Vetus M4.14 Marine Serpentine Pulley Upgrade Kit is very easy to install. Allow approx. 1 hour and 5 minutes the first time you do this simple installation (read the client review). When purchasing any Electromaax marine alternator the pulley can be installed for you at the factory. The new 10 groove serpentine (micro ā€˜Vā€™) crank pulley simply slips over your current crankshaft pulley and is secured with the bolts supplied. The new serpentine water pump pulley simply replaces your original.

Helpful install hints

1. When loosening the 4 water pump bolts leave the existing belt in place THEN undo the bolts. This way you can use the belt to stop the W/P pulley spinning. 2. Check the threads in the existing crankshaft pulley have not rusted. We find in most cases a little grease on our bolts clean the threads out if you carefully put them in half a turn and back. Alternatively you can use the correct thread chase (typically metric). This popular Yanmar Marine engine, and all other engines operate much smoother, quieter and virtually eliminate belt dust with a serpentine upgrade kit. Additional benefit of an Electromaax kit is the ability to drive auxiliary devices ie: Seafrost refrigeration, engine driven water maker, second alternator, compressor… with the addition of a second crankshaft pulley. Contact us for further details You can now safely operate the Electromaax SM-12-80, 100 or 120 amp marine alternators that produce up to 70% of their output at fast idle.

Submit your review

Create your own review

Marine Engine Parts, Marine Alternators, Regulators & Pulley Kits
Average rating:  
 1 reviews
by Gil MacGregor on Marine Engine Parts, Marine Alternators, Regulators & Pulley Kits
Vetus M4.14 Serpentine Upgrade

John, I was able to install my new pulleys this weekend and I couldn't be more pleased.

I ended up using the longer of the two belts but for the normal Vetus M4.14 I believe that the shorter one, Jason 380 would work. I needed the longer one as I have a after market Balmar alternator installed and its housing is bigger so the short belt will not fit.

Can I send you back the two Jason 380s in exchange for two Jason 390s?

Again, It works great and I am very pleased to have purchased your product. I look forward to the products long service and the increased performance of engine.

Captain Gil MacGregor

Additional information

Weight 1.5 lbs
Dimensions 8 × 8 × 3 in